Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pipes on a Volkswagen Beetle 1200?

Model: Volkswagen Maggiolino MK 1 - Years 1938-1980
Part: Checks and maintenance

In this tutorial, you will learn how to replace the flexible fuel pipes on a Volkswagen Beetle 1200. For this operation, you will need the appropriate fuel hose and a filter. First, using a 13 mm socket spanner, remove the four bolts securing the fuel tank. Then, lift it slightly to access the lower rigid pipe. At this point, disconnect any existing pipe and fit the replacement by inserting the filter in between. Finally, route the pipe to the rear of the car, connect it to the air duct, and attach the duct to the pump.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Valve Timing Adjustment for Volkswagen Beetle 1200
Valve Timing Adjustment for Volkswagen Beetle 1200
Volkswagen Maggiolino (1938-1980 / MK 1) In this video tutorial, learn how to adjust the valve timing of a Volkswagen Beetle 1200. This operation should be performed every 10,000 miles. Firs…
How to Remove the Front Seat from the VW Beetle 1200
How to Remove the Front Seat from the VW Beetle 1200
Volkswagen Maggiolino (1938-1980 / MK 1) Today, you will learn how to independently remove the front seat from the Volkswagen Beetle 1200. For this operation, you will need a star screwdrive…
Guide to Removing the Engine from a Volkswagen Beetle
Guide to Removing the Engine from a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) This guide will show you the steps to disassemble and remove the engine from the bodywork of a Volkswagen Beetle, commonly known as the Bug. First, o…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos