Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on a Volkswagen Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Timing belt

Video tutorial

To replace the timing belt on a Volkswagen Up, open the bonnet to access the components located within the engine bay: on the left side, you will find the side cover of the engine block, which must be removed by loosening its fastening screws. This will allow you to locate the underlying belt, which can be extracted by removing the tensioner pulley; at this point, you can install the new belt around the pulleys, reposition the tensioner pulley, and check that everything functions correctly.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

Volkswagen Up (2011-2024 / MK 1) You can completely replace the timing belt on a Volkswagen Up by lifting the car so that the front right wheel is not in contact with the ground; it …
Volkswagen Up (2011-2024 / MK 1) Today, I will explain how to replace the timing belt on the Volkswagen Up. To carry out the replacement, open the front bonnet and using a 16 mm sock…
Volkswagen Up (2011-2024 / MK 1) Today’s information will show you how to remove and replace the timing belt on the Volkswagen Up 1.0 TSI. To access the timing belt, you will first n…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Handbrake on a Renault Scenic

This brief video tutorial shows the necessary steps to reset the handbrake on a second-generation Renault Scenic, produced from 2003 to 2009. First, insert the key and briefly press the ignition button to turn on the vehicle's instrument cluster without starting the engine. Now, with the passenger door open, remove the key and hold down the lock button together with the start button for about five seconds. Once done, the handbrake light will start to flash. At the same time, press and pull the handbrake button and lever to complete the reset.

Watch the video!


by ScegliAuto

More videos