Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Speaker in the Volkswagen Tiguan?

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Speaker

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the door speaker in the Volkswagen Tiguan, a very simple operation that requires removing the panel. First, remove the cover of the handle, then unscrew the screws indicated using a Torx T30 key. Once done, rotate the bolt inside the lower slot by 90 degrees, and using a plastic spatula, pry the panel away from the door along the perimeter.

At this point, you can unscrew the mounting screws of the speaker, disconnect the relevant cables, and fit the replacement by following the reverse procedure.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

Replacing Speakers on Volkswagen Tiguan
Replacing Speakers on Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) After removing the inner door panel (unscrew the various screws beneath the trim and disconnect the wiring for the lock and window regulator; for mor…
Removing the Door Panel of a Volkswagen Tiguan
Removing the Door Panel of a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Remove the door panel of a new model Volkswagen Tiguan (passenger side). Before starting the disassembly, disconnect the battery terminals located in…
How to Remove the External Door Handle on a Volkswagen Tiguan
How to Remove the External Door Handle on a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Before you start, open the door of your Volkswagen Tiguan. Begin by disengaging and removing the screw cover that secures the handle located on the i…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos