|
Do it yourself
| |||
| ||||
How to Replace the Auxiliary Belt on a Volkswagen Passat
Model: Volkswagen Passat
B6, 3C
- Years 2005-2010
In this video tutorial, you can see how to replace the auxiliary belt on a Volkswagen Passat. The first step is to purchase a new auxiliary belt. Get inside the vehicle, turn off the engine, and pull the handbrake. Disconnect the battery to avoid damage to the electrical system using a socket wrench with a 10 mm bit. At this point, lift the front of the car with a hydraulic jack and place axle stands under the vehicle for safety. Unscrew the bolts of the front wheel, and once the front of the car is lifted, you can also remove the wheel. Once the wheel is removed, place it under the vehicle for added safety. Now, you need to remove the wheel arch liner to access the auxiliary belt; for this, use a Torx T20 socket for the wheel arch screws. Once the wheel arch is removed, you have access to the auxiliary belt. Use a socket to loosen the belt; now, by lifting the tensioner, you can remove the auxiliary belt; now, position the new auxiliary belt (the markings on the belt should turn clockwise).
Updated on 27 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Passat
(2014-2023 /
B8, 3G, MK 8)
Today's guide shows the main steps to remove and replace the air conditioning compressor of the Volkswagen Passat. First, open the bonnet and disconn…
Volkswagen Passat
(2010-2014 /
B7)
In this video we see how to change the serpentine belt on a Volkswagen Passat B7 version; we will need a 16mm wrench. We see in the video where this …
Volkswagen Passat
(2010-2014 /
B7)
On what basis can we determine if it is time to change the timing belt? Open the bonnet and listen to the noise the engine makes. If you hear a stran…
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Opel Grandland X
While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.137
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |