Do it yourself
| ||||
|
Volkswagen Passat - Video tutorial
Model: Volkswagen Passat
B7
- Years 2010-2014 In this video we see how to change the serpentine belt on a Volkswagen Passat B7 version; we will need a 16mm wrench. We see in the video where this belt is located. In fact, there is not much space to work with, so we will have to do some small acrobatics. We place the 16mm wrench on the tensioner pulley and pull towards the front of the engine, in order to loosen the belt tension, without completely releasing it, as this could damage it. Doing it with two people is ideal, and in fact that's what our youtuber did, who was able to remove and reposition the belt quite easily (unfortunately without showing us, because his assistant was in charge of the camera). However, make sure that when we put the belt on the crank pulley, the belt teeth are correctly positioned.
Posted on 13 May 2024 by ScegliAuto
How to replace the drive belt on a Volkswagen Passat.
Volkswagen Passat (2005-2010 / 3C, B6) In this video tutorial, we can see how it is possible to replace the serpentine belt on a Volkswagen Passat. The first thing to do is to purchase a n
Replacing the serpentine belt on the Volkswagen Passat B6
Volkswagen Passat (2005-2010 / 3C, B6) Let's find out in this short guide how to disassemble and replace the serpentine belt or the V-belt on the Volkswagen Passat B6 TDI. First of all we
Determine when to replace the timing belt of a Volkswagen Passat.
Volkswagen Passat (2010-2014 / B7) On what basis can we determine if it is time to change the timing belt? We open the hood and listen to the noise produced by the engine. We hear a st Other guides that may interest you |
How do you replace the horn on the Citroà «n Berlingo?In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.020
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |