Do it yourself
| ||||
|
Volkswagen Golf - Video tutorial
Model: Volkswagen Golf
Golf VII, MK 7, Golf 7
- Years 2012-2019 To replace the parking sensors of the Volkswagen Golf, it is necessary to completely remove the rear bumper of the car: to do this, it will be necessary to unscrew the screws located inside the wheel arches and at the bottom of the bumper, completely removing the bumper. After the bumper has been detached, it will be possible to access the connectors located inside it, which must be disconnected in order to remove the parking sensors completely. In this way, it will be possible to connect and insert the new replacement parts, fixing the bumper as well.
Posted on 31 May 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |