Do it yourself
| ||||
|
Volkswagen Golf - Video tutorial
Model: Volkswagen Golf
Golf VII, MK 7, Golf 7
- Years 2012-2019 The replacement of the parking sensors on the Volkswagen Golf is done by loosening the screws that secure the wheel arch located near the sensor that needs to be replaced. By loosening the fastening screws of the wheel arch, it will be possible to detach it and locate the sensor from inside the bumper. It will be possible to remove it by pushing it from the outside towards the inside and disconnecting its appropriate connector on the inside. In this way, the new sensor can be connected to the appropriate connector by inserting it into its housing and verifying that everything functions correctly.
Posted on 17 September 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |