|
Do it yourself
| |||
| ||||
Repair and Installation of the Lock Cylinder on a Volkswagen Golf IV
Model: Volkswagen Golf
Golf IV, MK 4, Golf 4
- Years 1997-2003
This video shows how to repair the lock cylinder on a Volkswagen Golf IV: use a flat-head screwdriver to remove the clip, carefully take off the end piece, then the spring cover and the spring. Remove the cam, which is the part that typically wears out. Replacement kits can easily be found on e-commerce sites; then reassemble the cylinder by replacing the spring and spring cover. To compress the spring, insert it into the retaining groove and compress it with the end piece, holding it down and rotating it until the end of the spring, using your fingernail or a small screwdriver for assistance. While keeping it pressed down, replace the cover, fitting it into its notch and, while maintaining pressure on the spring, insert the closure pin. Finally, reinstall the lock.
Updated on 30 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
In this tutorial, see how to replace the lock in a Volkswagen Golf, a very simple operation. First, open the door in question, then remove the outer …
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
In this tutorial, you will learn how to remove the lock cylinder in a Volkswagen Golf, a very simple task. You will need a small flathead screwdriver…
Volkswagen Golf
(1997-2003 /
Golf IV, MK 4, Golf 4)
In this brief guide, follow the steps to remove and replace the rear door lock module on a Volkswagen Golf. First, open the rear door of the vehicle …
Other guides you may be interested in |
Frequently Asked QuestionsHow to Reset the Tyre Pressure Light on the Opel Grandland X
While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.102
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |