Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel to Repair the Window Regulator

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Door trim panel

See other generations:
Video tutorial

The video details the steps to repair the window motor assembly and its gears to avoid complete replacement and save some money. To remove the panel, start by disassembling the internal part of the handle, then unclip the entire panel including the window controls.

Disconnect the connectors and proceed to unscrew the fixing screws behind the handle and around the perimeter using a cross-head screwdriver and a Torx screwdriver. You can then unclip the panel and remove the metal insulation screwed to the door to access the window motor directly.

Unscrew the support screws of the window mechanism and perform the necessary maintenance, then reassemble everything. The video demonstrates the operation on a 2002 Volkswagen Passat.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacing the Window Switch Panel on VW Passat
Replacing the Window Switch Panel on VW Passat
Volkswagen Passat (2010-2014 / B7) How to remove the door panel to replace the window switch panel on a Volkswagen Passat? This video explains the procedure. Before starting the disass…
How to Remove the Door Panel from a Volkswagen Passat
How to Remove the Door Panel from a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Before you can start, open the door of your Volkswagen Passat. Begin by unclipping and removing the insert of the door handle panel, using a thin but…
Removing the Door Panel on a Volkswagen Passat
Removing the Door Panel on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Let’s remove the door panel on a Volkswagen Passat (driver's side). Before starting the disassembly, disconnect the battery terminals located in the …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos