Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Headlight Restoration

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Headlight

See other generations:
Video tutorial

It is quite common for front headlights to become cloudy due to sunlight exposure and often also from car wash detergents. You can restore their shine by polishing them after wet sanding.

After cleaning the headlight surface of any insects or dirt, wet sand the surface using very fine sandpaper (1000 or 2000 grit) until the surface is uniformly dull. At this point, proceed with polishing using abrasive paste, repeating the steps until achieving a perfectly shiny surface.

A professional restoration involves sanding followed by painting with a special clear coat.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How to reset the Volkswagen Golf
How to reset the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) On the 2009 Volkswagen Golf 6, the reset/restoration is performed directly from the instrument cluster by following the usual sequence as seen in the…
How to Replace the Front Headlight on a Volkswagen Golf 7?
How to Replace the Front Headlight on a Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Replacing the front headlight on a Volkswagen Golf 7 is not as straightforward as one might think; however, the task is perfectly feasible even for a…
Replacement of the Front Headlight on the Volkswagen Golf
Replacement of the Front Headlight on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today's procedure will show you how to remove and replace the front headlight on the Volkswagen Golf, following the instructions below. First, open t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos