Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of the Volkswagen Touareg

Model: Volkswagen Touareg 7L, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Key

See other generations:
Video tutorial

In this video, we will see step-by-step instructions that will allow you to remove and replace the battery of the remote key for the Volkswagen Touareg. First, take your remote and start removing the physical key from the rest of the remote.

Then, separate the electronic board from the battery, as shown in the video. At this point, remove and replace the battery with a new one of the correct type (in this case, a CR 2032 3V); insert it the right way round and reassemble the electronic part and battery, finally securing the physical key!


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Volkswagen Touareg
How to Replace the Key Battery of a Volkswagen Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) How to replace the battery in your Volkswagen Touareg key remote? In this video, learn how to proceed with the replacement. Take the car ignition key…
How to Replace the Key Battery on a Volkswagen Touareg
How to Replace the Key Battery on a Volkswagen Touareg
Volkswagen Touareg (2017-2024 / ) Start by inserting the tip of a thin but sturdy tool into the slot between the cover and the body of the key fob for your Volkswagen Touareg, then le…
How to Replace the Key Battery in the 2020 Volkswagen Touareg?
How to Replace the Key Battery in the 2020 Volkswagen Touareg?
Volkswagen Touareg (2018-2026 / CR, MK 3) This video shows how to replace the battery in a remote key for the 2020 Volkswagen Touareg. The same procedure can be used for other keys from the V…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos