Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Crafter
    4. : How to set the time on the Volkswagen Crafter

Volkswagen Crafter - Video tutorial

Model: Volkswagen Crafter MK 1, 2F, 2E - Years 2006-2017
Part: Instrument cluster
Operation: How to set the time on the Volkswagen Crafter

If you want to manually change the time displayed on the mini display of the instrument panel of your first-generation Volkswagen Crafter (2006-2017), all you have to do is carefully read the following guide and put into practice what is described. First, insert the key and turn on the vehicle's instrument panel. Immediately after, press and hold the button located below the RPM gauge and release it as soon as the hour figure starts flashing. At this point, locate the "+" and "-" buttons located below the speedometer and use them to adjust the hours. Repeat the same procedure for the minutes and, finally, press and hold the same button used at the beginning to save the changes.


Posted on 29 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Crafter 2006-2017 - What are the warning lights that can turn on in the Volkswagen Crafter? Read Answer
    • Crafter 2017-2024 - What problems with Adblue on the Volkswagen Crafter? Read Answer
    • Crafter 2006-2017 - What are the warning lights on the dashboard of the Volkswagen Crafter? Read Answer
    • Crafter 2006-2017 - What is the meaning of the VW Crafter warning lights? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos