Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Oil Pressure Sensor on a Volkswagen Transporter?

Model: Volkswagen Transporter T4, MK 4 - Years 1990-2003
Part: Checks and maintenance

To replace the oil pressure sensor on a Volkswagen Transporter, access the lower part of the engine bay. Here, you will find a protective panel located above the oil sump. By loosening the bolts securing the panel, you can locate the pressure sensor in the centre of the oil sump. Remove it from its seat by unscrewing the bolts and replace it with a new part. After the replacement, secure the new sensor and cover everything with the previously removed panel.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Transporter (1990-2003 / T4, MK 4) In this video we can see where the oil pressure sensor is located in the Volkswagen Transporter van and how to proceed in case we need to replace it,…
Volkswagen Transporter (2014-2025 / MK 6, T6) In order to reset the tire pressure warning light on the Volkswagen Transporter, you need to inflate the tires until they reach the correct pressure …
Volkswagen Transporter (1979-1990 / T25, T3, MK 3) There are specific tools available to check the correct functioning of the engine oil pressure sensor (commonly known as the bulb): it is very import…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos