Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Engine Oil Pressure Sensor Located on a Volkswagen Transporter Van?

Model: Volkswagen Transporter MK 4, T4 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you will see where the engine oil pressure sensor is located on a Volkswagen Transporter van and how to proceed if you need to replace it, a very simple and quick operation. As shown, the sensor is positioned at the lower part of the vehicle, just above the support where the oil filter is screwed in. To remove the sensor, first wait until the engine is completely cold, then disconnect the power connector and unscrew it using a spanner.

To install the replacement, simply follow the reverse procedure.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Pressure Sensor on a Volkswagen Transporter?
How to Replace the Oil Pressure Sensor on a Volkswagen Transporter?
Volkswagen Transporter (1990-2003 / MK 4, T4) To replace the oil pressure sensor on a Volkswagen Transporter, access the lower part of the engine bay. Here, you will find a protective panel locat…
Where is the Brake Fluid Reservoir in the Volkswagen Transporter Van?
Where is the Brake Fluid Reservoir in the Volkswagen Transporter Van?
Volkswagen Transporter (1990-2003 / MK 4, T4) In this video, we can see where the brake fluid reservoir is located in the Volkswagen Transporter T4 van. As shown, it is positioned inside the engi…
Where is the OBD port located in the Volkswagen Transporter van?
Where is the OBD port located in the Volkswagen Transporter van?
Volkswagen Transporter (2014-2025 / T6, MK 6) In this video, you can see where the diagnostic port is located in the Volkswagen Transporter van, useful if you need to check the errors recorded by…

Other guides you may be interested in

    Frequently Asked Questions

    • Transporter 2014-2025 - Where is the OBD port located on the Volkswagen Transporter? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos