Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Brake Fluid Reservoir in the Volkswagen Transporter Van?

Model: Volkswagen Transporter T4, MK 4 - Years 1990-2003
Part: Brake system

In this video, we can see where the brake fluid reservoir is located in the Volkswagen Transporter T4 van. As shown, it is positioned inside the engine bay, right in front of the bulkhead on the passenger side. The reservoir is also easily identifiable by the yellow cap with the brake system icon printed on it. To check the fluid level, simply open the cap and ensure it remains just below the "MAX" mark on the right side. If topping up is necessary, avoid any spillage and wear gloves.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Volkswagen Transporter Van?
How to Replace the Fuel Filter on a Volkswagen Transporter Van?
Volkswagen Transporter (2003-2014 / T5, MK 5) In this tutorial, you will see how to replace the fuel filter on a Volkswagen Transporter van, a very simple and quick operation. First, ensure that …
How to reset the AdBlue warning light on the Volkswagen Transporter?
How to reset the AdBlue warning light on the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / MK 6, T6) To reset the AdBlue warning light on the Volkswagen Transporter, first top up the fluid by adding the additive to the designated tank: the vent for t…
How to reset the AdBlue warning light on the Volkswagen Transporter?
How to reset the AdBlue warning light on the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / MK 6, T6) To turn off the AdBlue warning light on the instrument panel of the Volkswagen Transporter, top up the fluid by adding the additive to the relevant t…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos