Do it yourself
Frequently asked questions about cars and motorcycles

How to Time the Engine of the Volkswagen Golf

Model: Volkswagen Golf Golf 1, MK 1 - Years 1974-1983
Part: Checks and maintenance

In this guide, follow the main instructions to time the engine of the Volkswagen Golf. First, open the bonnet of your car and begin removing the serpentine belt and the timing belt; note that timing should be done every time the timing belt is replaced. Align the mark on the crankshaft pulley with the mark on the serpentine belt pulley; meanwhile, the piston must be at the end of its stroke, using a dial gauge. Then refit the timing belt!

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) These short and simple steps will show us how to synchronize the automatic climatronic air conditioning system on the Volkswagen Golf. First of all, …
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To reset the central locking system of the Volkswagen Golf 5, open the car using the emergency key, which can be released from the remote by pressing…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Shortly, we will see the instructions that will allow us to reset and calibrate the sunroof motor of the Volkswagen Golf. First, we get into the car …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos