Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Setting the Timing on a Volkswagen Golf VI Without Tools

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Timing belt

See other generations:
Video tutorial

In this video, see how to set the timing on a Volkswagen Golf VI without the use of tools: rotate the engine clockwise, and you will see that there are three slots on the cam pulley. The notched one goes to the highest point.

If you take a mirror, you will see a 6 mm hole on the right where you can insert a bolt to make a reference mark. Once you have completed this operation to ensure you have found the correct timing, mark the crankshaft below with a marker, and even though it is not necessary since it is a rotary pump, it is advisable to mark the fuel pump as well.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Timing Belt
Instructions for Removing the Timing Belt
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) If you want to tackle the replacement of the timing belt, it is absolutely essential to have good general mechanical knowledge and especially to have…
How to Time the Engine of the Volkswagen Golf
How to Time the Engine of the Volkswagen Golf
Volkswagen Golf (1974-1983 / Golf 1, MK 1) In this guide, follow the main instructions to time the engine of the Volkswagen Golf. First, open the bonnet of your car and begin removing the serp…
Replacing the Timing Belt on the VW Golf
Replacing the Timing Belt on the VW Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Replacing the timing belt also requires replacing the tensioner, the bearing, and especially the water pump; this is maintenance that requires good m…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos