Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Lights on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you will see how to reset the oil light and service light on a Volkswagen Polo. This procedure is very simple and takes less than 1 minute to complete. To carry out this procedure, first insert the key without turning it. Then, press and hold the menu/clock button located in the centre of the instrument cluster.

While holding it, turn on the instrument cluster until 'service reset' or 'oil service reset' appears. At that point, press the 0.0/SET button once.

The procedure will then be complete, and you can restart the cluster to verify that the procedure was successful.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2021 Volkswagen Polo
How to Reset the Service Light on a 2021 Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) This tutorial shows the procedure to reset the service light on a Volkswagen Polo. This is useful if the light remains on even after performing the s…
How to Reset the Service Light on the 2007 Polo
How to Reset the Service Light on the 2007 Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) This video tutorial shows the procedure to reset the service light on the Volkswagen Polo 9N produced from 2001 to 2009. This guide can be useful if …
How to replace the serpentine belt in the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this tutorial, we can see how to replace the serpentine belt in the Volkswagen Polo, an extremely simple and quick operation. First of all, make s…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos