Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Handbrake Gaiter on the Volkswagen Golf

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Parking brake

See other generations:
Video tutorial

Below are the steps to remove and replace the handbrake gaiter on the Volkswagen Golf, following the instructions provided. First, get inside the cabin and start raising the handbrake; then detach the plastic cover located at the base of the handbrake lever and begin to slide the gaiter off, releasing the small plastic clip, as shown in the video.

At this point, replace and install the new handbrake gaiter, inserting it correctly and securing it to the base of the lever to lock it in place!


Updated on 18 August 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Handbrake Cable of the Volkswagen Golf
Guide to Replacing the Handbrake Cable of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, we will discover the instructions that will allow you to dismantle and replace the handbrake cable of the Volkswagen Golf. First, get inside t…
How do you adjust the handbrake of the Volkswagen Golf?
How do you adjust the handbrake of the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) It will be possible to adjust the handbrake of the Volkswagen Golf by loosening the screws that secure the panel covering the central tunnel, located…
How to Adjust the Handbrake on the Volkswagen Golf?
How to Adjust the Handbrake on the Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To adjust the handbrake on the Volkswagen Golf, turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, press t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos