Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to reset the tire indicator light in the Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Tires
Operation: How to reset the tire indicator light in the Volkswagen Polo?

Resetting the tire sensor in the Volkswagen Polo, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we need to have restored the correct pressure of each tire following the instructions in the manual. Let's start by going inside the cabin, then turn on the instrument panel and open the passenger's glove compartment. Next, we locate the button depicting the icon of the tire sensor, press and hold it, and release it only after the sensor light has stopped flashing. Finally, restart the vehicle.


Posted on 22 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - Tire pressure warning light on Volkswagen Polo: why? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos