Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to reset the tire pressure warning light on a Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: -board computer
Operation: How to reset the tire pressure warning light on a Volkswagen Polo?

Good morning, today's goal is to reset the tire indicator light on our Volkswagen Polo. Let's start by sitting in the driver's seat of the car. After that, we will need to start the car by turning the key in the ignition switch. Once we have done that, we will need to open the glove compartment located in front of the passenger seat. By doing so, we will have reached the reset button for the tire indicator light on our Volkswagen Polo. Let's proceed by pressing and holding the reset button until the light turns off, and we will have successfully completed the procedure.


Posted on 17 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - What does the engine malfunction warning light on the Volkswagen Polo mean? Read Answer
    • Polo 2017-2025 - What to do if voice control on the Volkswagen Polo is not available? Read Answer
    • Polo 2017-2025 - Why does the center display of the Volkswagen Polo 6 not work? Read Answer
    • Polo 2009-2017 - How to reset the tire warning light in a Wolksvagen Polo? Read Answer
    • Polo 2009-2017 - What does the Volkswagen Polo "Insp" light mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos