Do it yourself
Frequently asked questions about cars and motorcycles

Car Radio Removal and Dashboard Dismantling

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Car stereo

See other generations:
Video tutorial

To dismantle the car radio, you will need a Torx screwdriver size 20 and a plastic trim removal tool. Using the plastic trim tool, disengage the air vent grille located at the centre of the dashboard (for some versions, it may also be necessary to disconnect a connector located beneath the grille).

Remove the fixing screw of the plastic support and extract it by pulling it out from the back first. Unscrew the two fixing screws of the central air ducts and carefully disengage the retaining clips to extract them, and if necessary, disconnect the connector for the hazard switch.

Unscrew the two screws securing the central console frame and carefully disengage the retaining clips (2 on the right, 2 on the left, and 4 underneath). At this point, you can remove the car radio by unscrewing the 4 Torx fixing screws and disconnecting the connectors attached to it, 2 at the bottom right (disconnect by lifting the locking tab first) and then the one at the top left (remove simply by rotating the locking tab). NOTE: this is one of the example videos I have already described.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The steps to remove the radio from a Volkswagen Golf 5 are: - remove the side cover; - unscrew the four Torx screws; - extract the radio; - disconnec…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, we will see how to access the fuses of the radio and how to replace them on the Volkswagen Golf. First, open the bonnet of th…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today's instructions will show you how to find and enter the radio code for the Volkswagen Golf in simple steps. First, get inside the cabin and star…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos