Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Radiator on the Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Heater core

See other generations:
Video tutorial

To replace the heating radiator on the Volkswagen Jetta, loosen the screws securing the plastic panel on the right side of the driver's footwell. Once this panel is removed, you will have access to the components underneath: here you will find the plastic panel protecting the radiator, which must be detached.

After removal, disconnect the pipes connected to the heat exchanger, which can then be extracted from its housing after removing the securing screws and replaced with a new one.


Updated on 30 August 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Heating Radiator in the Volkswagen Jetta
Guide to Replacing the Heating Radiator in the Volkswagen Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) Today's instructions will show you how to remove and replace the heating radiator in the Volkswagen Jetta, which is also applicable to the Golf. Firs…
How to Replace the Heating Radiator in a Volkswagen Jetta?
How to Replace the Heating Radiator in a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To replace the heating radiator in a Volkswagen Jetta, loosen the screws and remove the clips securing the side panel located to the right of the dri…
How to replace the heating radiator in the Volkswagen Jetta?
How to replace the heating radiator in the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial we can see how to replace the heating radiator in the Volkswagen Jetta, a very simple operation. First of all, make sure that the en…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos