Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Light Bulb of the Front Headlamp on a Volkswagen Passat

Model: Volkswagen Passat MK 8, 3G, B8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
Video tutorial

Today's steps will show you how to dismantle and replace the side light bulb of the front headlamp on a Volkswagen Passat. First, open the bonnet and start by removing the electrical connector of the side light, taking it out with the bulb holder; then disconnect the small bulb and replace it with a new one, as shown in the video.

From the wheel arch, by removing the plastic cover, you will be able to access the other bulbs of the front headlamp; replace any faulty ones with new ones, following the video to the end!


Updated on 31 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Volkswagen Passat?
How to Replace the Front Headlight Bulb of the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) To replace the front headlight bulb of the Volkswagen Passat, lift the bonnet to access the rear of the headlight corresponding to the bulb to be rep…
Replacement of the daytime running light bulb of the Volkswagen Passat front headlight
Replacement of the daytime running light bulb of the Volkswagen Passat front headlight
Volkswagen Passat (2010-2014 / B7) Following these simple steps, we will see how to disassemble and replace the daytime running light bulb of the front headlight of the Volkswagen Pass…
How to Replace the Front Headlamp Bulb on a Volkswagen Passat B8?
How to Replace the Front Headlamp Bulb on a Volkswagen Passat B8?
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) To replace the headlamp bulb on a Passat B8, remove the cover located inside the wheel arch corresponding to the bulb that needs replacing. After rem…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos