Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Test ESP System Functions

Model: Volkswagen Jetta A4, MK 4 - Years 1998-2005
Part: Onboard computer

The malfunction of the system shown in the video is indicated by the code 01486. Turn on the ignition of the car and observe that the ABS warning lights are flashing. Start the car and drive at a low speed in a large area. To restore the system functions to their original condition, turn the steering wheel to the left by 90/180 degrees while simultaneously pressing the accelerator pedal. At this point, the original system conditions are restored. The maintenance operation shown in the images is performed on a Volkswagen Jetta.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to perform a factory reset of the multimedia system of the Volkswagen Jetta
How to perform a factory reset of the multimedia system of the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Today's information will allow us to reset the factory settings of the multimedia system of the Volkswagen Jetta. First, let's get on board the car a…
Window Regulator Mechanism Installation Instructions
Window Regulator Mechanism Installation Instructions
Volkswagen Jetta (2005-2010 / MK 5, A5) To replace the window regulator mechanism (which consists of two sliding rails, the respective glass fixing clips, and control cables operated by the…
Front Bonnet Removal Instructions
Front Bonnet Removal Instructions
Volkswagen Jetta (1998-2005 / A4, MK 4) Removing the front bonnet is very simple, but it is advisable to do it with two people to support it. Once opened, disconnect the washer system tubes…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos