Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the trip meter on the Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Warning light – error code

To reset the trip meter on the Volkswagen Polo, insert the ignition key into the ignition switch to turn on the instrument cluster. Once the cluster is on, press and hold the button located on the right side of the instrument cluster, just below the speedometer. Hold it for a few seconds to reset the trip meter to zero. After the reset procedure, turn off the cluster by turning the key.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) In order to reset the partial odometer of the Volkswagen Polo, you need to insert the ignition key into the corresponding slot: once the dashboard is…
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) The procedure for resetting the partial odometer on the Volkswagen Polo is done by turning on the instrument panel, inserting the ignition key into t…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) To reset the trip odometer on a Volkswagen Polo, turn on the ignition by rotating the key in the ignition switch. Once the ignition is on, press and …

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - How to enter the Volkswagen Polo radio security code? Read answer
    • Polo 2009-2017 - What does the catalyst warning light on the Volkswagen Polo 1.2 TDi indicate? Read answer
    • Polo 2009-2017 - What does the warning light with a yellow triangle on Volkswagen Polo mean? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos