Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the Start&Stop on the Volkswagen Golf?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

To disable the Start&Stop on the Volkswagen Golf, lever off the central tunnel panel surrounding the gear lever using a tool. Once this panel is removed, disconnect the underlying connector connected to the Start&Stop disable button. After disconnecting this button, connect a diagnostic tool to the vehicle's OBD port to disable the system via the scanner; once disabled, disconnect the scanner to ensure everything functions correctly.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this brief guide, you will see the instructions needed to permanently disable the Start&Stop function on the Volkswagen Golf. To disable this func…
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) To disable the Start&Stop feature of the Volkswagen Golf 8, turn on the instrument cluster by rotating the ignition key in the ignition switch. This …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today, in this video tutorial, see how to disable the start&stop function of the Volkswagen Golf TDI, following the instructions below. The start&sto…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos