|
Do it yourself
| |||
| ||||
How to Turn Off the Tyre Pressure Light on a Volkswagen Polo
Model: Volkswagen Polo
6R, MK V, Polo 5, Polo V, MK 5
- Years:
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
In this very short video tutorial, we can see how to reset the tyre pressure light on a fifth-generation Volkswagen Polo, produced from 2009 to 2017. Before performing this operation, it is necessary to check the pressure of all tyres as indicated by the manufacturer. To reset, first press and hold the dedicated reset button located in the glove compartment on the passenger side, then turn on the vehicle's instrument cluster. After doing this, wait a few seconds with the button still pressed, and the tyre pressure light will turn off.
Updated on 9 September 2026 by ScegliAuto
Related tutorials
Volkswagen Polo
(2001-2009 /
MK IV, Polo 4, 9N, MK 4, Polo IV)
To completely clear the tyre pressure warning light on the Volkswagen Polo, inflate the tyres to the optimal pressure value: this value is indicated …
Volkswagen Polo
(2009-2017 /
6R, MK V, Polo 5, Polo V, MK 5)
You can completely make the tire pressure warning light disappear from the instrument panel of the Volkswagen Polo by inflating the tires to the reco…
Volkswagen Polo
(2009-2017 /
6R, MK V, Polo 5, Polo V, MK 5)
It will be possible to completely remove the tire pressure warning light shown on the instrument panel of the Volkswagen Polo by inflating the tires …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
