Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement and Check of the Handbrake

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Parking brake

See other generations:
Video tutorial

Remove the ashtray by prying off the two round plastic covers, then remove the cup holders. You will now see the adjuster for your handbrake.

By turning the 10mm bolt either way, you can adjust the butterfly that controls the tension of the two cables, increasing or decreasing the pressure generated by the piston on the brake disc. Before completing the job, ensure that the brake discs rotate freely without any unwanted friction with the pads.

Also, check that the handbrake engages after 2 or 3 clicks. Once done, you can reposition the ashtray and cup holders.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Handbrake Cable of the Volkswagen Golf
Guide to Replacing the Handbrake Cable of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, we will discover the instructions that will allow you to dismantle and replace the handbrake cable of the Volkswagen Golf. First, get inside t…
Replacing the Handbrake Gaiter on the Volkswagen Golf
Replacing the Handbrake Gaiter on the Volkswagen Golf
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) Below are the steps to remove and replace the handbrake gaiter on the Volkswagen Golf, following the instructions provided. First, get inside the cab…
How do you adjust the handbrake of the Volkswagen Golf?
How do you adjust the handbrake of the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) It will be possible to adjust the handbrake of the Volkswagen Golf by loosening the screws that secure the panel covering the central tunnel, located…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos