Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement and Maintenance of the Battery

Model: Volkswagen Sharan 7M, MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Battery

See other generations:
Video tutorial

Remove the air intake duct by unscrewing the necessary bolts and pull off only the inlet part without the side hose, which is removed by pressing the buttons to unlock it. Now remove the bolt to detach the air duct up to the filter, and to remove the hose connected to it, disconnect the connectors for the sensors and also detach the tie that secures the hose.

Now you can remove the battery cover and the side cover.

Finally, remove the bolts securing the battery, starting with the negative terminal, then remove the bolts that fix the battery to the car's structure. Now retrace all the steps in reverse to install the new battery.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Change the Key Battery on the Volkswagen Sharan
How to Change the Key Battery on the Volkswagen Sharan
Volkswagen Sharan (2010-2023 / 7N, MK 2) If you need to replace the battery in the remote key for your vehicle because it is dead, the text below provides all the necessary information and s…
Reset maintenance interval of the Volkswagen Sharan.
Reset maintenance interval of the Volkswagen Sharan.
Volkswagen Sharan (1995-2010 / 7M, MK 1) Below we will discover the instructions and procedure for resetting the service maintenance light on the Volkswagen Sharan. First, we get into the ca…
How to change the battery on a Volkswagen Sharan 2.0 TDI
How to change the battery on a Volkswagen Sharan 2.0 TDI
Volkswagen Sharan (2010-2023 / 7N, MK 2) Let's see how to change the battery of the Volkswagen Sharan 2.0 TDI. If we do not have a voltage maintainer, we must be prepared to reset the config…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos