Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the V-belt of the VW Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, 6R, Polo 5, MK 5, Polo V - Years 2009-2017
Part: V-belt
Operation: How to replace the V-belt of the VW Polo

The replacement of the V-belt of a Volkswagen Polo vehicle is an operation that can be carried out independently, thanks to our short video tutorial. We start the replacement of the belt by opening the engine hood and placing a cloth on it to avoid scratches to the bodywork. We continue by setting aside the timing belt tensioner pulley, using a combination wrench n°16 we remove the V-belt. We put the tensioner pulley back in its position and install the new belt, put the pulley back in place and close the engine hood.


Posted on 10 March 2024 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos