Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Automatic Gear Knob on a Volkswagen Jetta MK4

Model: Volkswagen Jetta A4, MK 4 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Transmission

See other generations:
Video tutorial

In this video, we will see how to remove the automatic gear knob on a Volkswagen Jetta MK4: first, put the gear lever in neutral. You will need a blunt tool, like the one shown in the video, rather than a screwdriver, which could scratch the lever; insert it between the knob and the chrome part of the gear lever, separating the two parts.

Then, from the knob button, move it left and right to loosen the piece. Be careful not to pull too hard as there is a spring inside that could fly out. Once the button has completely come out, you can pull up the knob: ensure the gear actuator rod is in good condition.

If nothing is broken, you can fit the new knob in place.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Shift Gaiter on a Volkswagen Jetta
How to Remove the Gear Shift Gaiter on a Volkswagen Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) Before you start, sit in the driver's seat of your Volkswagen Jetta. Begin by unclipping the base of the gear shift gaiter using a thin but sturdy to…
How to Replace the Gear Gaiter on VW Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Is the gear gaiter on your VW Jetta damaged? Here's how to replace it. Use a plastic lever to disconnect the leather gaiter frame, then remove the me…
Instructions for Removing the Gear Knob
Instructions for Removing the Gear Knob
Volkswagen Jetta (2010-2018 / MK 6, A6) To remove the gear knob, start the engine and position the gear lever in neutral. Detach the chrome insert located at the centre of the knob by press…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos