Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Shift Gaiter on a Volkswagen Jetta

Model: Volkswagen Jetta A4, MK 4 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Shifter boot

See other generations:
Video tutorial

Before you start, sit in the driver's seat of your Volkswagen Jetta. Begin by unclipping the base of the gear shift gaiter using a thin but sturdy tool.

Next, lift the gaiter as high as possible. Once you have lifted the gaiter, you will reach the clip that secures it to the gear lever.

Proceed to unclip this clip, then lift and remove the gaiter along with the gear knob. After completing this step, pull the gear knob off the gaiter, and the disassembly will be finished.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Gaiter on VW Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Is the gear gaiter on your VW Jetta damaged? Here's how to replace it. Use a plastic lever to disconnect the leather gaiter frame, then remove the me…
Instructions for Removing the Gear Knob
Instructions for Removing the Gear Knob
Volkswagen Jetta (2010-2018 / MK 6, A6) To remove the gear knob, start the engine and position the gear lever in neutral. Detach the chrome insert located at the centre of the knob by press…
Gear Selector Modification Kit
Gear Selector Modification Kit
Volkswagen Jetta (1998-2005 / A4, MK 4) If the gear lever tends to stick during gear changes, it is likely that there is play in the coupling between the pin and the plate that supports the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos