Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Volkswagen UP

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Service warning light

The information in this guide will show you the procedure to reset the service light for the regular maintenance oil change on the Volkswagen UP, as well as the Seat Mii and Skoda Citigo. First, get into the vehicle and press and hold the set button, located on the right side of the instrument cluster; then turn on the ignition and release the button, pressing the left button once afterwards, as shown in the video. At this point, turn off the instrument cluster again and then start the engine to complete the reset operation!

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on a Volkswagen Up
Resetting the Service Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Let’s look at the steps and instructions on how to reset the service light for routine maintenance on a Volkswagen Up. First, enter the cabin and pre…
How to Reset the Service Light on a Volkswagen Up?
How to Reset the Service Light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) To reset the Service light on a Volkswagen Up, press and hold the button on the right side of the instrument cluster, labelled "0.0/SET". While holdi…
How to Reset the "Service" Light on a Volkswagen Up?
How to Reset the "Service" Light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) Hello, today focus on resetting the "Service" light on your Volkswagen Up. Before starting, ensure that you have completed the service as required by…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos