Do it yourself
| ||||
|
Volkswagen Lupo - Video tutorial
Model: Volkswagen Lupo
MK 1
- Years 1998-2005 In order to remove the door panel of the Volkswagen Lupo, you need to pry it with an object like a screwdriver, in order to detach the handrail trim: under this trim you will be able to locate the fixing screws that need to be loosened. Once these screws are unscrewed, you can proceed by unscrewing the additional fixing screws, located on the left side and on the lower bottom of the panel. After all these screws have been loosened, you can detach the panel and disconnect the underlying connectors, in order to insert the new replacement part.
Posted on 22 March 2024 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |