Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How do you replace the headlight bulb of the Volkswagen Golf?

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years 2012-2019
Part: Headlight bulb
Operation: How do you replace the headlight bulb of the Volkswagen Golf?

The operation of replacing the headlight bulb of the Volkswagen Golf is done by opening the hood, so that it is possible to access the components located inside the engine compartment: here you can identify the internal covering of the optical group, which must be detached to access the bulb located inside the headlight. Once the old bulb has been removed, it will be possible to insert the new one, connecting it to the corresponding connector and closing the headlight with its cover, also checking that everything works.


Posted on 2 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Golf 1997-2003 - How do I replace the position light bulb on my Golf 4? Read Answer
    • Golf 2003-2008 - How to remove the headlight bulb of a Volkswagen Golf? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos