Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a 2017 Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

If you want to find out how to correctly perform the manual reset of the service light on your 2017 Volkswagen Polo, just read this new guide carefully and follow the described steps. First, enter the cabin and check that the instrument cluster is completely off, then press and hold the menu button and turn on the ignition.

As soon as the message "Reset inspection interval?" appears on the display, release the menu button and press the "0.0/Set" button to confirm the reset of the warning light.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you can start, sit in the driver's seat of your Volkswagen Polo and close all the doors. Begin by pressing and holding the "0.0/SET" button lo…
How to Reset the Inspection Light on a Volkswagen Polo
How to Reset the Inspection Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Follow the procedure to reset the oil change service light on your Volkswagen Polo. First, get into the vehicle and press and hold the button located…
How to reset the Oil Service light on the Volkswagen Polo?
How to reset the Oil Service light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To reset the Oil Service light on the Volkswagen Polo, press the button located immediately below the instrument cluster on the left side, then inser…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos