Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling and Assembling the Bearing

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Bearing

Gather various tools for dismantling the following parts we will examine. First, remove the wheel and place it under the car chassis for added safety, then remove all the pins from the brake caliper, leverage with a screwdriver and pull it away. Prepare to unscrew all the fastening screws of the disc, after removing it, use a hammer and screwdriver to leverage the hub cover and unscrew the central Torx pin. Extract the old bearing and install the new one. Tighten with the appropriate spanner to ensure the correct torque. Reassemble everything, paying attention to the correct positioning of the parts.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Wheel Bearing
Replacing the Rear Wheel Bearing
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Obtain the replacement bearings. Lift the vehicle, secure it, and remove the wheel. Remove the metal cover protecting the securing bolt located on th…
How to Remove the Front Wheel Bearing on a VW Golf 4
How to Remove the Front Wheel Bearing on a VW Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Let's see how to disassemble a wheel bearing on a VW Golf Mk4. Position the car on a column lift, loosen the bolts with a telescopic spanner and rais…
How to replace the front wheel bearing of a Volkswagen Golf
How to replace the front wheel bearing of a Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Below we will see the step-by-step instructions that will allow us to disassemble and replace the front wheel bearing of the Volkswagen Golf. First o…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos