Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Maggiolino
    4. : Disassembly of the door panel on a Volkswagen Beetle

Volkswagen Maggiolino - Video tutorial

Model: Volkswagen Maggiolino MK 1 - Years 1938-1980
Part: Door panel
Operation: Disassembly of the door panel on a Volkswagen Beetle

To remove the door panel on an old Volkswagen Beetle (first model), follow these steps. To start the job, remove the window crank handle by unscrewing the central screw as shown in the video. At this point, you can proceed by removing the plastic of the interior door handle. Use a specific tool (such as a flathead screwdriver or, better, a plastic lever) to extract the door panel: do this slowly and extract a small portion of the panel at a time, to avoid damaging it. Of course, proceed in reverse for reassembly.


Posted on 14 May 2024 by ScegliAuto



How to remove the window switch on a Volkswagen Beetle
Volkswagen Maggiolino (1998-2005 / ) Before we can start, we will have to go and open the front door of our Volkswagen Beetle. So let's start by disassembling and removing the door panel
Volkswagen Beetle (Beetle) headlight bulb replacement
Volkswagen Maggiolino (1938-1980 / MK 1) In this video tutorial we will see how to remove the headlight and want to replace the bulb of a Volkswagen Beetle (old Beetle). First we are going t
Replacing the steering wheel on a Volkswagen Beetle Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) We replace the steering wheel of the Volkswagen Beetle. Let's see in this video how to proceed with the disassembly. First we unscrew the big bolt pl

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos