Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on a Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Cabin air filter

See other generations:
Video tutorial

To prevent dirt and dust from entering the ventilation system of the Volkswagen Golf, a filter is installed on the intake, which must be replaced after fifteen thousand miles. Once you reach this mileage, open the front bonnet; on the passenger side under the windscreen, you will find the filter to change.

Remove the sealing sections, and using a cross-head screwdriver, unscrew the four screws securing the cover flange and remove it. Detach the frame holding the filter element and take it out; use a vacuum cleaner to remove any dirt from the housing, insert the new filter, selecting it from the various types available, and secure it with the frame.

Refit the flange, securing it with the screws, and replace the seal.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Volkswagen Golf 6
How to Replace the Cabin Air Filter in a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) If you want to replace the cabin air filter in your Volkswagen Golf Mk6 yourself, follow the procedure described in this guide. First, purchase a new…
How to Replace the Cabin Filter on a 2015 Volkswagen Golf
How to Replace the Cabin Filter on a 2015 Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this new mini guide for your 2015 Volkswagen Golf, discover how to quickly and independently replace the cabin air filter. First, turn off the eng…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) The cabin air filter is located on the passenger side, beneath the glove compartment. Remove the Velcro cover to access the air duct; at this point, …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos