Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Crankshaft Position Sensor Located in the Volkswagen Golf?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Crankshaft position sensor

See other generations:
Video tutorial

In this video, you will see where the crankshaft position sensor is located in the Volkswagen Golf, useful in case you need to replace it due to a fault. As shown, the sensor is located at the lower part of the engine, precisely next to the oil filter, which will need to be unscrewed to create the necessary working space.

To replace the sensor, simply disconnect the power connector, unscrew the single fixing bolt, and follow the reverse procedure. Ensure you work with the vehicle cold and switched off.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to Remove the Crankshaft Sensor of a Golf
How to Remove the Crankshaft Sensor of a Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this guide, learn how to replace the crankshaft sensor of a Volkswagen Golf 5. Lift the front bonnet and secure it with the support rod. Locate th…
Where are the Fuses Located on a Volkswagen Golf 7?
Where are the Fuses Located on a Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) All the fuses on a Volkswagen Golf 7 are divided within the designated fuse boxes installed in the vehicle. The first of the two is located inside th…
Where are the fuses located in the Volkswagen Golf 7?
Where are the fuses located in the Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The fuses in the Volkswagen Golf 7 are located inside the designated fuse boxes installed in the vehicle: the first of the two is positioned inside t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos