Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment of the Volkswagen Polo

Model: Volkswagen Polo MK 6, Polo 6, AW1, MK VI, Polo VI - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Glove compartment

See other generations:
Video tutorial

Follow these brief and simple steps to remove and replace the glove compartment of the Volkswagen Polo. First, get inside the vehicle and start by removing the plastic cover located on the side of the dashboard next to the glove compartment; then open the glove compartment and unscrew the screws found at the top. Leverage the sides to detach and remove it, as shown in the video.

At this point, carry out the repair or directly replace the glove compartment, applying the reverse procedure for reassembly!


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Box of the Volkswagen Polo
How to Remove the Glove Box of the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Today, follow these instructions to remove and replace the glove box of the Volkswagen Polo in simple and quick steps. First, get inside the cabin an…
How to Unlock the Glove Compartment on the Volkswagen Polo
How to Unlock the Glove Compartment on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) This guide shows how to open the glove compartment on the Volkswagen Polo. If the lock handle of the glove compartment breaks, there is a very simple…
How to Replace the Cabin Fan Resistor on a Volkswagen Polo
How to Replace the Cabin Fan Resistor on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Follow these instructions to remove and replace the cabin fan resistor on your Volkswagen Polo. First, get into the vehicle on the front passenger si…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos