Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the inner lining of the rear door in the Volkswagen Passat B6?

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Car door

The reasons that require the disassembly of the internal door panel of a car are different, such as repairing a window or window mechanism, repairing the handle, restoring the panel, and so on. To carry out the disassembly, as can be seen in the video, the procedure is almost standard, in fact the internal handle, the grip handle, all the clip or screw fasteners are removed and finally it is unhooked from its seat by pulling forcefully. In general, it is a fairly simple job to perform.

Posted on 26 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear door panel of the Volkswagen Passat
How to disassemble the rear door panel of the Volkswagen Passat
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) These short and simple instructions will show us how to disassemble the rear door panel of the Volkswagen Passat. First, we open the rear door and st…
How to Open the Locked Door of the Volkswagen Passat
How to Open the Locked Door of the Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) Below are the steps to open the locked rear door of the Volkswagen Passat. First, get into the vehicle and start by removing the door panel. Take off…
Replacement of the rear side glass of the Volkswagen Passat
Replacement of the rear side glass of the Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) In this guide we will see the main instructions that will allow us to disassemble and replace the rear side glass of the Volkswagen Passat. First, we…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos