Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Volvo S60 remote control?

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Key

In this tutorial we can see how to replace the battery of the Volvo S60 remote control, an extremely simple and quick operation. To do this, we will only need a small screwdriver with a flat tip and a replacement battery of type CR2032. First of all, we extend the emergency metal key by pressing the appropriate button, then we insert the screwdriver into the indicated slot, lever and unlock the rear door. At this point we can remove the old battery, insert the replacement taking care to respect the polarity and reassemble everything.

Posted on 5 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Volvo S60 remote control?
How do you replace the battery of the Volvo S60 remote control?
Volvo S60 (2010-2018 / MK 2) To replace the battery of the Volvo S60 remote control, you need to remove the key from the top of the device, so that you can leverage inside its ho…
How to Replace the Remote Battery in a Volvo S60?
How to Replace the Remote Battery in a Volvo S60?
Volvo S60 (2010-2018 / MK 2) To replace the battery in the remote for the Volvo S60, pull the lever located on the bottom of the device: this will allow you to remove the key fro…
How to change the battery of a Volvo S60 remote control
How to change the battery of a Volvo S60 remote control
Volvo S60 (2010-2018 / MK 2) Today we will see how to replace the batteries of the remote control of a Volvo S60, model produced from 2010 to 2018. Let's start the procedure by i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos