Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the engine maintenance reminder on the Volvo S80

Model: Volvo S80 MK 2 - Years 2006-2016
Part: Warning light – error code

In this guide we will see the instructions that will allow us to reset the maintenance reminder on the Volvo S80 engine. Generally, the procedure to reset the error is identical to that for resetting the service reminder, by holding down the right button on the dashboard until the audible signal; in this case, however, the error code 097 appears, which is related to the engine oxygen sensor (lambda sensor). After replacing the sensor, we will again reset the error code, verifying that the reminder has been permanently cleared from the instrument panel!

Posted on 7 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the maintenance service indicator light of the Volvo S80.
Resetting the maintenance service indicator light of the Volvo S80.
Volvo S80 (1999-2006 / MK 1) Let's discover the information that will allow us to reset the regular maintenance reminder for the engine oil change (service) on the Volvo S80. Fir…
Resetting the Maintenance (Service) Warning of the Volvo S80
Resetting the Maintenance (Service) Warning of the Volvo S80
Volvo S80 (2006-2016 / MK 2) Today, we will discover the steps to reset the regular maintenance (service) warning of the Volvo S80. First, get into the vehicle and press and hold…
Resetting the Service Light on the Volvo S80
Resetting the Service Light on the Volvo S80
Volvo S80 (2006-2016 / MK 2) In this brief and simple guide, we will discover the procedure to reset the service light for the regular maintenance of the engine oil change on the…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos