Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the diesel filter of the Volvo XC40 2.0 D4

Model: Volvo Xc40 MK 1 - Years 2017-2026
Part: Diesel fuel filter

Below we will see the main instructions on how to disassemble and replace the diesel filter of the Volvo XC40 2.0 D4. First, lift the vehicle and start locating the diesel filter, located on the rear part; remove the plastic protective cover to access it, as shown in the video. At this point, disconnect the electrical connector of the diesel filter to remove it, disconnecting the filter pipes and unscrewing the bracket screw; replace the cartridge with the new one, as well as with the original one, reassembling and connecting the diesel filter!

Posted on 13 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the diesel fuel filter of the Volvo XC40?
How do you replace the diesel fuel filter of the Volvo XC40?
Volvo Xc40 (2017-2026 / MK 1) In order to replace the fuel filter of the Volvo XC40, you need to lift the car using a jack or a lift, so that it is possible to access the bottom o…
How to Replace the Cabin Air Filter in a Volvo XC40?
How to Replace the Cabin Air Filter in a Volvo XC40?
Volvo Xc40 (2017-2026 / MK 1) To replace the cabin air filter in a Volvo XC40, open the glove compartment on the passenger side to detach the appropriate fastening clips inside. O…
What is the fuse diagram for the Volvo XC40?
What is the fuse diagram for the Volvo XC40?
Volvo Xc40 (2017-2026 / MK 1) In this video, we can see where the fuse boxes of the Volvo XC40 are located and what their corresponding diagrams are, useful in case we need to che…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos