Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volvo
  4. :
  5. Xc40
  6. : How do you replace the diesel fuel filter of the Volvo XC40?

Volvo Xc40 - Video tutorial

Model: Volvo Xc40 MK 1 - Years 2017-2024
Part: Diesel filter
Operation: How do you replace the diesel fuel filter of the Volvo XC40?

In order to replace the fuel filter of the Volvo XC40, you need to lift the car using a jack or a lift, so that it is possible to access the bottom of the engine compartment: here you will be able to locate protective panels that need to be loosened by unscrewing the appropriate screws. Once these panels have been removed, you will be able to locate the fuel filter in this position: this filter must be removed from its seat by disconnecting the fuel lines and unscrewing the supports. In this way, you can insert the new filter, checking that everything is working properly.


Posted on 7 May 2024 by ScegliAuto



How do you replace the cabin filter of the Volvo XC40?
Volvo Xc40 (2017-2024 / MK 1) In order to replace the cabin filter of the Volvo XC40, you need to open the glove compartment on the front passenger side, so that you can detach th
Where is the fuse box located on the 2023 Volvo XC40?
Volvo Xc40 (2017-2024 / MK 1) If you own a 2023 Volvo XC40 and don't know where the box containing all the various fuses of the car is located, then all you have to do is carefull
What is the fuse layout of the Volvo XC40?
Volvo Xc40 (2017-2024 / MK 1) If a device in our Volvo XC40 has suddenly stopped working, the first thing we can do is check the status of the respective fuses whose diagrams are

    Frequently Asked Questions

    • Xc40 2017-2024 - Where is the diesel filter located in the Volvo Xc40? Read Answer
    • Xc40 2017-2024 - Where is the diesel filter located in the Volvo Xc40? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos