Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the 2015 Volvo XC60

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

See other generations:
Video tutorial

Replacing the battery on a 2015 Volvo XC 60 car is a simple and quick operation that can be done independently thanks to our short tutorial that will explain the steps. After opening the front hood, release the hood seal and remove the battery cover.

Loosen the negative pole clamp with a 10mm wrench and remove the negative terminal from the battery. Using a 13mm wrench, also remove the opposite nut on the positive terminal.

Before removing the battery, it is necessary to use a wrench with a 10 insert extension to unscrew the locking nuts on the bracket. Remove the battery and insert the new one. Tighten the nuts on the bracket and insert the protective shield.

Connect the positive terminal and immediately after the negative terminal. Close the box cover and position the hood seal.


Posted on 17 September 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery in a Volvo XC60
How to Replace the Key Battery in a Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) In this guide for all Volvo XC60 second generation owners, discover the steps to replace the small battery inside the key yourself. First, purchase a…
How to replace the battery in the Volvo XC60?
How to replace the battery in the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In this tutorial, we can see how to replace the battery in the Volvo XC60, an extremely simple and quick operation. First of all, make sure that the …
How to replace the remote battery for the Volvo XC60?
How to replace the remote battery for the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In this tutorial, you can see how to replace the remote battery for the Volvo XC60, a very simple and quick operation. For this, you will need a smal…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos