Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Volvo XC60?

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Tail light bulb

In this tutorial, we can see how to replace the rear headlight bulbs in the Volvo XC60, a very simple and quick operation. First of all, let's make sure that the key is not inserted, so we can operate safely. Then, we open the trunk door and remove the panel located at the back of the headlight in question. Next, we grasp the socket of the faulty bulb, slightly rotate it counterclockwise, and pull it out of the housing. At this point, all that’s left is to replace the bulb and reassemble everything by following the reverse procedure.

Posted on 10 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Volvo XC60?
Where are the fuses located in the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) The fuse boxes on the Volvo XC60 are responsible for containing the fuses that regulate the operation of the devices: in this type of vehicle, four c…
Disassembly of the front headlights of the Volvo XC60.
Disassembly of the front headlights of the Volvo XC60.
Volvo Xc60 (2008-2016 / MK 1) The steps outlined in this guide will show us how to disassemble and replace the front headlights and their bulbs on the Volvo XC60. First, let's ope…
Where Are the Fuses Located in the Volvo XC60?
Where Are the Fuses Located in the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) In the Volvo XC60, each fuse is contained in one of the designated fuse boxes installed in the vehicle: there are three of them in this type of vehic…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos