Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S60
    4. : How to remove the mirror from the mirror on Volvo S60

Volvo S60 - Video tutorial

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Outside rearview mirror
Operation: How to remove the mirror from the mirror on Volvo S60

How do we remove the mirror mounted in the rear view mirror of a Volvo S60? With a lever with plastic or rubber coating, we go to pry between the perimeter of the mirror frame and the mirror of the same. We pry until the slide comes off the mirror; very delicate operation because the slide or the mirror itself could break. Once the damaged mirror glass has been removed, disconnect the glass power supply terminal, press the locking clips to disconnect the mirror cover. Finally, we can replace the damaged part with a new one. We are careful to engage the plastic snap clips.


Posted on 11 November 2023 by ScegliAuto



Side mirror replacement on Volvo S60
Volvo S60 (2000-2009 / MK 1) Is the mirror of the Volvo S60 broken? Do we want to replace it with us? Let's see how. We pry with a plastic between the mirror and the cover of the
How do you replace the glass of the rearview mirror of the Volvo S60?
Volvo S60 (2010-2018 / MK 2) In order to replace the glass of the rearview mirror of the Volvo S60, you need to move the glass in order to create a sort of space between it and t
How to remove the mirror of a Volvo S60 / V60
Volvo S60 (2010-2018 / MK 2) In order to remove the mirror from the Volvo S60 / V60 (mirror removal is identical) we will need a Torx T25 wrench, a Torx T30 and a thin but strong

    Frequently Asked Questions

    • S60 2010-2018 - How much does it cost to replace the rear view mirror on the Volvo S60? Read Answer
    • S60 2010-2018 - How much does it cost to replace the exterior mirror on the Volvo S60? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos